Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Alachua, FL
We provide independent Lennox air duct cleaning and duct system service across Alachua, FL. The thing that makes our Lennox work here different is that we diagnose the whole duct system around the equipment, not just the nameplate. Alachua’s mix of original attic metal trunks and newer flex runs changes what a Lennox system is actually breathing against, and that changes what the cleaning and repair work needs to look like. Call (855) 408-4151 for a free estimate.
Why Alachua Residents Choose Us for Lennox Service
Lennox equipment is common enough in Alachua that we see the same handful of issues again and again: coil corrosion in the humid season, drain pans that slope wrong, flex collars that let go at the plenum. Knowing those patterns is half the job. The other half is doing the work with commercial-grade equipment. We bring Rotobrush rotary brush systems and Nikro negative-air vacuums, with Abatement Technologies filtration to contain what comes loose, rather than a shop vac and a brush.
We’re an independent provider. We’re not affiliated with, authorized by, or sponsored by Lennox, and we don’t sell equipment. What we do is clean, repair, and seal duct systems on Lennox installations across Alachua, using quality parts that fit the equipment and hold up here. Scheduling is straightforward, the estimate is free, and the price is set per job in writing before we start. Our technicians have up to 9 years of experience.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Alachua
Here’s what we actually find when we open up Lennox systems in Alachua homes:
- All-aluminum coil pinhole leaks in Merit and Elite systems. Alachua’s long humid season keeps those coils wet for months, and the aluminum assemblies develop pinhole leaks and finish corrosion. Homeowners notice it as refrigerant loss and cooling that fades through the afternoon. The duct side matters because a choked return makes the coil run colder and wetter, which speeds the problem.
- Overflowing drain pans and mildewed air-handler cabinets. When an attic-installed Lennox air handler sits on a pan with the wrong slope, or the trap dries out, water sits and mildew grows. That’s the musty smell people in Alachua report after a hot streak. Cleaning the coil and pan while the system is open catches this.
- Flex collars and takeoffs pulling loose at the plenum. Newer Lennox installs in the 32616 subdivisions use flex runs, and the collars at the plenum work loose. Conditioned air dumps into the attic, static pressure climbs, and the system runs longer than it should. We pressure-check the connections and reseal them.
- Return cabinets and filter grilles loaded with oak pollen and spring debris. The live-oak canopy around Alachua drops heavy debris, and the spring pollen dump lands right on return grilles. A loaded return chokes airflow, the system runs long, and the Lennox coil has a real chance of icing. Cleaning the return side restores the airflow the equipment was designed around.
- Unsealed attic trunks pulling humid air into the system. In the older core of Alachua, the original rectangular metal trunks were never sealed at the boots or joints. Attic air leaks in, condenses on cool duct surfaces, and gets pulled back through loose returns into the Lennox air handler. Sealing is usually the fix, not replacing equipment.
Lennox Service in Alachua: What Local Conditions Mean for Your Equipment
Alachua has an unusual split for a town this size. The older homes near downtown, mostly in 32615, still have their original rectangular metal ductwork or retrofits where window units were converted to central air. The newer subdivisions off CR 235A and around 32616 use flex-duct runs in slab-on-grade homes. Two completely different duct systems, two different sets of Lennox problems, feeding the same service area.
In the older core, the metal trunk lines often run through unconditioned attics that hit 140°F in July. That heat cooks the ducts and drives condensation on the inside of the metal. Then a hot spell ends, the attic cools, and the first call we get is about a dripping ceiling boot or a musty smell from ducts that were never sealed. The Lennox equipment didn’t fail. The duct did. Around CR 235A, the story flips: tight new construction traps construction dust and pollen, and the flex collars at the Lennox plenum are where the leaks show up. Same brand, different failure modes, and both need the duct system addressed before anything on the equipment side makes sense.
Lennox Models & Products We Service in Alachua
We work on the Lennox lines that show up in Alachua homes most often: Merit Series air handlers and condensers, Elite Series equipment, and Dave Lennox Signature Collection variable-capacity units. We also service Lennox Healthy Climate filtration and duct products, and we work alongside controls and accessories from Honeywell and Aprilaire.
How we choose parts is simple. Where fit and calibration matter – coils, control boards, blower components – we use OEM Lennox parts. For filters, mastic, flex duct, and fittings, we spec quality aftermarket parts that fit the system and last in this climate. We don’t stock parts, but we can source what the job needs and tell you upfront what it will cost. We evaluate whether repair or replacement is right based on the condition of the coil, cabinet, and duct system, not on the age of the equipment.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Alachua
Air duct cleaning in Alachua typically runs $350 to $700 for a whole-home system. Evaporator coil cleaning is typically $200 to $400, and duct sealing depends on how much of the trunk and boots need work. Those are estimates, not quotes. The written estimate we give you after inspecting the system is the price you pay, and the estimate itself is free.
What drives the number is the size and layout of the duct system, how much sealing is needed, whether the attic access is tight, and whether the coil and pan need attention while the system is open. In Alachua’s older homes, the original metal trunk lines and duct boots usually take more sealing than the flex runs in newer construction. We don’t quote per vent and we don’t discount the headline number only to make it up later. Call (855) 408-4151 for an exact quote on your Lennox system.
Serving Alachua, FL – Our Local Coverage Area
We serve Alachua and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Alachua
Yes. We’re an independent Lennox service provider, not affiliated with or authorized by the manufacturer. Independence is actually an advantage here, because we can evaluate the whole duct system around the Lennox equipment without being tied to one manufacturer’s component recommendations. Our technicians have up to 9 years of experience.
The smell usually traces to a drain pan with the wrong slope, a dried trap, or mildewed duct surfaces pulling humid attic air back into the system. In Alachua’s older homes, unsealed metal trunks running through hot attics are a common source. Cleaning the coil and pan and sealing the leaks fixes the cause. Call (855) 408-4151 to schedule an inspection.
Often, yes, especially when a loaded return grille or a loose flex collar at the plenum is the bottleneck. Cleaning the return side and resealing the connections can restore the airflow the equipment was designed to move. If the problem is a failed coil or a bad blower, that’s a repair, and we’ll tell you straight. Call (855) 408-4151 for a free estimate.
All-aluminum Lennox coil assemblies in Merit and Elite systems do develop pinhole leaks and finish corrosion in Alachua’s long humid season. Refrigerant loss and cooling that degrades through the day are the usual signs. Keeping the return side clean and clear helps the coil run as intended, but a failed coil needs a repair. Call (855) 408-4151 for an estimate.
Older metal trunks near downtown are rigid but often unsealed at the boots and joints, so hot attic air leaks in and condenses on cool duct surfaces. Flex ducts in the newer subdivisions off CR 235A leak mainly at the collar where they meet the plenum. Both are fixable, just differently. Call (855) 408-4151 for an exact quote on your Lennox system.
Service Areas Near Alachua
We serve Lennox owners in Alachua and the surrounding area, including High Springs, Newberry, Gainesville, Williston, and Starke. For Lennox work in Alachua, our Lennox service team can schedule you across these areas. If you’re on the edge of a nearby town like High Springs or Newberry, just mention it when you call.
Book Your Lennox Service in Alachua Today
We clean, we repair, we clear the airflow in Lennox systems across Alachua. The estimate is free, the price is set per job by written estimate, and we bring commercial-grade equipment to the job so you can see what’s actually inside your ducts. Call (855) 408-4151. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Holloway Air Duct Cleaning.